13
14
Insert the assembled drawers into the corresponding compartments as
shown. Ensure the drawers slide easily along the rails. If the drawer is
not catching or sitting flush, twist the end of the cover (F) until it catches
on the stopper (G).
Attach 4x wedges (P) into the corners of the back of the unit and secure
with 4x screws (R). Tighten with a screwdriver.
9
8
R
R
R
R
P
P
P
P
F
15
16
Attach 1x safety strap (V) to the top of the back side of the unit as
shown using 1x washer (Z) and 1x screw (W). Tighten with a
screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to wall
using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit is
balanced and steady before use. You’re done, enjoy!
Wall Mount
wall
plug
long
screw
strap
washer
X
Y
Z
V
V
W
Z
Z
V
W
Kennedy Bedside Table
Assembly Instructions
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
