5
6
Flip Four Cube over so feet stand on the floor. Slide cupboard back
panel [6] into grooves as shown. Screw hinge pins (F) into the holes in
the cupboard door. Lower door into pin hole in shelf [4].
Screw in hardware (B) into top panel [5]. Place panel on top of side
panels while sliding the ends of (B) into the holes. Make sure the door
hinge pin (F) also fits ino top panel [5]. Insert and tighten hardware (A).
6
F
x2
H
F
5
7
A
x6
B
A
Storage Unit - Four Cubes
Assembly Instructions
4
mocka.co.nz | mocka.com.au
