1
2
First screw in hardware (B) into side panels [1] and [3]. Slide both
panels together with the middle shelves [2] and [4], making sure the
grooved ends line up. Insert hardware (A) into the holes on shelves [2]
and [4].
Tighten (A) with a screwdriver. Slide cupboard back panel [6] into
grooves as shown. Screw hinge pins (F) into the holes in the cupboard
door. Lower door into pin hole in shelf [4].
x8
A
B
x8
3
1
4
2
6
7
F
x2
H
F
B
A
1
3
4
Screw in hardware (B) into base panel [8]. Place base panel on top
while sliding the ends of (B) into holes on the top of the side panels.
Make sure the door hinge pin (F) slots in. Insert and tighten hardware
(A) with screwdriver.
Attach feet blocks (D) to base panel using long screws (C) and the
pre-drilled holes in the base panel. Fasten clip plate (E) to the cupboard
door. Attach the magnetic clip (I) inside the cupboard using screws (G).
C
D
8
A
x6
x1
H
E
x1
G
I
B
A
Storage Unit - Four Cubes
3
mocka.co.nz | mocka.com.au
Assembly Instructions
