© MOBOTIX AG www.mobotix.com Vertraulich / Confidental * MERGEFORMAT
2107_QI_S74 Long Cable Extender_en.docx • 01.09.21 • Seite/Page 2/ 6
MOBOTIX Long Cable Extender
1
Scope of Delivery
1x S7A-LCE Camera
1x S7A-LCE Sensor
4x Dowel S6
4x Washer DIN125-ø3,2-A2
4x Spax Screws 4x40-A2
1x Mini Screwdriver 2x30
4x Cable tie
1x Spax Bit
2
Installation
1)
Sensor Cable
2)
Optical Link
3)
Electrical Link
1) Sensor Cable
Connect the sensor module to the "sensor" box of the Long Cable
Extender using the Mx-A-S7A-CBL-01 cable. Make sure to align the
plug to the right and push into the connector until fully inserted.
Connect the "camera" box of the Long Cable Extender using the
Mx-A-S7A-CBL-xx cable to the S74. Make sure to align the plug to
the right and push into the connector until fully inserted.
2) Optical Link:
Remove the protection caps from the LC connector of the optical
fiber cable. Push the plug into the connector until fully inserted.
The plug is fully inserted and locked once you hear a “CLICK”
sound.
Make sure to push the white rubber seal above the opening of the
Long Cable Extender and fasten the seal using the cable tie.
1)
2)
3)