© 2016 Excel, part of Van Os Medical B.V.
Koperslagerij 3 | 4651 SK Steenbergen | The Netherlands | T: +31 (0)167-573020 | E: [email protected] | W:
www.vanosmedical.com
© 2016 Excel, part of Van Os Medical B.V.
Koperslagerij 3 | 4651 SK Steenbergen | The Netherlands | T: +31 (0)167-573020 | E: [email protected] | W:
www.vanosmedical.com
16
User manual |
Excel Click & Go Lite
6 Maintenance
Your Click & Go power pack needs periodical maintenance. This is necessary for long and optimum comfort for
the user. A badly maintained system will give you more technical problems, make it harder to steer and it will void
your warranty. Preventative maintenance is very important. We advise you to have your power pack checked by
a qualified Van Os Medical dealer at least once a year. This dealer will replace parts if necessary and will only use
Excel parts. These annual inspections will make sure your system will function correctly for years.
There are a lot of things you can do yourself to keep your power pack in optimum condition. If you regularly check
the system and perform (small) maintenance tasks, this will extend the lifetime of your chair and increase your ease
of use. In the following paragraphs these maintenance steps are further described.
6.1
The tyres
You should check your tyres regularly for signs of wear. If no tread is present or there are any cracks or other
defects you must have them replaced.
6.1.1
PU tyres
We use PU tyres (polyurethane or puncture-free tyres) on the Click & Go. You can easily recognise these tyres as
they do not have a valve. PU tyres do not need to be inflated and cannot be punctured. The PU tyre tread can wear
out just as an air tyre can. Check periodically to see if the tread is still deep enough.
6.2
Cleaning the power pack
It is important to clean your Click & Go Lite regularly. You should at least clean it by removing the dirt every time you
have used the Click & Go Lite. This will extend the lifetime of the Click & Go Lite and it will influence the driving
comfort when you use the Click & Go Lite the next time.
6.3 Battery
We only use PU tyres (polyurethane or puncture free) on our Click & Go Lite You can easily recognise these tyres as
they do not have a valve. PU tyres do not need to be inflated and cannot be punctured. The PU tyre tread can wear
out just as an air tyre can. Check periodically to see if the tread is still deep enough.
Содержание Excel Click & Go Lite
Страница 1: ...User manual Excel Click Go Lite...
