© 2016 Excel, part of Van Os Medical B.V.
Koperslagerij 3 | 4651 SK Steenbergen | The Netherlands | T: +31 (0)167-573020 | E: [email protected] | W:
www.vanosmedical.com
© 2016 Excel, part of Van Os Medical B.V.
Koperslagerij 3 | 4651 SK Steenbergen | The Netherlands | T: +31 (0)167-573020 | E: [email protected] | W:
www.vanosmedical.com
14
User manual |
Excel Click & Go Lite
5.4
The attachment belt / fastening strap
The Excel Click & Go Lite is equipped with an attachment belt / fastening strap. This belt consist of two loops. The
longest loop should always be attached to the left-hand push handle of the wheelchair (photo 12); this is for safety.
The shortest loop is used to lift the rear wheels off the ground when you want to disengage the power pack, see
photo 13. It is also possible to adjust the length of the attachment belt / fastening strap in length.
5.5
Attaching and taking off the power pack
The power pack is attached to the frame of the wheelchair. It is important that this attachment is carried out in the
right way. When the power pack is not properly secured, it will not function properly and it may be dangerous.
5.6.1
Attaching the power pack
Once you have unpacked your Click & Go Lite, locate the locking mechanisms. Untighten the two Allen bolts. Place
the locking mechanisms on the lower side frame, just in front of the rear axle plate, as shown in photo 15. Tighten
the two bolts to hold the locking mechanism to the side frame. Ensure the locking mechanism grips on to the
cylindrical tube. This will need to be very tight. Please ensure the two locking mechanisms are in line. If they are out
of line, your Click & Go Lite will not drive in a straight line.
Locate the silver tube included with the Click & Go Lite. Please note that this can be extended by untightening the
black star shaped knob. On the unit itself, there is a black plate that fixes the extendable silver bar tot the unit.
Please loosen the 4 Allen head bolts. Place the silver tube through the black plate, see photo 16. Proceed to tighten
the 4 Allen head bolts on to the black plate. It is recommended that the unit is centralised on the silver tube before
fitting to the chair. Please use the black star knob to tighten the silver fixation tube in place.
To attach the unit to the locking mechanisms, please pull down on the yellow handles (photo 17). This releases the
spring loaded locking mechanism enabling you to attach the silver tube (photo 18, 19 & 20).
EXCEL CLICK & GO
|
PHOTO 12
Warning
Failure to correctly fit the power pack to your wheelchair could result in the chair being damaged or cause injury to
the user.
EXCEL CLICK & GO
|
PHOTO 13
EXCEL CLICK & GO
|
PHOTO 14
Содержание Excel Click & Go Lite
Страница 1: ...User manual Excel Click Go Lite...
