MOBILUS Cosmo|L, Руководство пользователя

Страница: 5 / 8

CONTINUED 05. SELECTING THE CHANNEL
5. After pressing any of the selection buttons in the operating mode, the button is
enabled or disabled (depending on the previous state). Depending on the next action,
point 3 or 4 is applicable.
NOTE After putting the remote control into the frame, there is no access to the STOP button.
To stop the motor, press the opposite area of the panel. This rule applies only to the COSMO
operating pilot L with COSMO receivers.
Fig. 5.5
b a
STOP
FOR EXAMPLE After pressing the LOWER AREA
Fig. 5.5a
on the panel, the motor can be
stopped at any time by pressing the UPPER AREA
Fig. 5.5b
.
06. TECHNICAL PARAMETERS
• L1 1-channel emitter
• L5 5-channel emitter
• rolling code
• FSK modulation
• 868 MHz
• 2 x Li Cr2032 3V
• Radio protocol: COSMO / COSMO | 2WAY ( control remotes are not bi-directional remotes, ie
they are not capable of displaying feedback.).
5