MOBILUS COSMO G3+, Руководство пользователя

Страница: 6 / 12

WARNING! The first remote control readed into the receiver is a remote control MASTER. It
allows you to operate motor and enter it in the PROGRAM MODE OF OTHER REMOTES.
3. On the remote control simultaneously press the
STOP and UP
- Fig. 6d.
4 LEDs start
blinking –
Fig. 6e.
Hold the buttons until the motor driver will perform two micro-move-
ments. The remote control has been readed into the motor.
Fig. 6d
a b
Fig. 6e
a b
7. READING IN OTHER REMOTE
1. On the MASTER remote control simultaneously press the STOP button and UP
- Fig. 7a.
4 LEDs start blinking
- Fig. 7b.
Hold the buttons until the motor driver will perform two
micro-movements confirming the input of the motor in the PROGRAM MODE.
Fig. 7a
MASTER MASTER
Fig. 7b
MASTER MASTER
6