FLOOR ANCHOR FIXING
Fitting to a stone or concrete floor:
First make certain that there are no services
that might be damaged by drilIing into the
floor. With the unit soundly fixed to the wall
extend the belt square across the bath and
vertically down the side and position the
anchor floor bracket snugly against the
bath panel. Use 7 off No: 10 stainless steel
screws into suitable rawl plugs to fix to this
type of floor. Follow the plug manufacturers
instructions for correct fitting.
Fitting to a wooden boarded floor
Procedure as above. Use 7 off of No: 10
screws to fasten the mounting bar to the
floor. If it is thought that the flooring is not
adequate to take the strain then add a
cross baton under the floor to reinforce
the boarding.
WEIGHTS AND MEASUREMENTS
Dimensions: Length 55.5cm (21.8”)
Height 32.5 cm (12.8”)
Depth 11.8 cm (4.6”)
Weight unpacked 11 kilos (24
3
/
4
lbs)
Weight packed 15.9 kilos (35
3
/
4
lbs)
GUARANTEE
The manufacturers undertake to provide a
full one year’s guarantee effective from
the date of purchase of the Bathlift
subject to (A) the bathlift being unable to
fulfil its function due to proven faulty
components or faulty workmanship and
(B) that the faulty product is returned
direct to the factory.
ENVIRONMENTAL INFORMATION
At the end of its useful life, this product
contains materials which when processed
correctly can be recovered and recycled.
By participating in the responsible
recycling of this product you will be
reducing the requirement for new raw
materials and reducing the amount of
material that would otherwise end up in
landfill.
The bath lift etc can be taken to your local
recycling centre. The local authority will
advise you of the collection facilities
available for waste electronic products in
your area.
8
MANUFACTURED BY:
AND
EMC
APPROVED
C R Manufacturing
EEE Producer Registration No. GA0292UQ
Frederick Street
Waddesdon
Aylesbury
Bucks HP18 0LU
(In the light of continuous improvement the company reserves the right to change the specification of the product and manual)
CONTAINED IN YOUR DELIVERY CARTON
I
1 Bathlift with remote control
I
1 Wall mounting Plate
I
1 Water temperature probe and suction disc
I
1 Floor Anchor Bar
I
1 Manual (fixing and fixing screws are NOT included)
I
1 Battery Box
I
1 Charger
08/10
Instructions updated:BATHLIFT RELAXA 5/8/10 15:52 Page 8
