Mobility Works Brumby, Руководство пользователя

Страница: 22 / 25

7.5 STORAGE
Ensure the scooter is stored under the following conditions:
 Ensure the seat is set in the ‘forward’ position;

Ensure the scooter is switched off;

Ensure the charger is disconnected when not in use.
Suggestion
：
Please store the scooter in an environment where it is out of direct sunlight or damp.
When storing for a long time, charge the battery to full power and then disconnect the
battery terminal. For more details contact to your dealer.
7.6 MOVING ABOUT

Switch off the power with the ignition key before moving. Always dismount from the scooter before
moving.

Lift the scooter by the chassis only, Do Not lift the scooters by the bumper or shrouds as this will cause
damage to the scooter and may injury you.

For your safety, always ask for help if required. You will need two people when moving or lifting the
scooter whole. If you are on your own, please disassemble the scooter before lifting.
8.TROUBLESHOOTING
If you have trouble with your scooter, you can inspect the following before taking your scooter to the dealer:
If you cannot solve the problem, contact your dealer for assistance.
Problem Symptom Remedy
Scooter will not switch on Batteries not connected
Rear and front sections not
connected
Circuit breaker has tripped
Check batteries are connected
Check connection on
front-to-rear loom
Push circuit breaker button to
restart
Scooter will switch on but
will not run
Flat batteries
Charger plugged in
Motor in freewheel mode
Check battery power
Unplug charger
Re-engage the freewheel lever
Scooter appears slow Flat batteries
Speed setting slow
Check battery power and / or
recharge
Check the speed dial is not set at
low