Mobility Works Brumby, Руководство пользователя

Страница: 16 / 25

breaker has tripped, the button will be protruding by 7mm. To reset the circuit breaker,push the button in and
the scooter should function as normal.
6.BATTERY CHARGING AND CARE
6.1 CHARGING THE BATTERY
Follow the procedure below step by step:
1. Turn the power switch to (OFF)
2. Plug the charger’s power cord into the mains.
3. Open the charging socket cap on the scooter’s
tiller head. Then connect the charger’s round plug
to the charging socket.
4. Switch on the plug socket.
5. The chargers LED will illuminate orange to indicate the batteries are charging. The charging duration is
about 8 hours. To ensure optimum performance a 12-hour charge is recommended.
6. The orange LED will turn green when charging is complete.
7. Turn off the charger, disconnect the power cord and the round plug from charger socket on the scooter.
Suggestion
：
1. Do not disconnect the charger cord if charging is not completed. The battery life will
be seriously shortened or decayed if the battery is repeatedly used without being fully
charged.Therefore be sure to charge the battery fully every time.
2. Always complete the charging until the LED light turns green. NEVER stop charging
before it is complete.
3. When fully charged, the battery charger will still trickle charge the battery to ensure
optimum range.
4. If you do not use your scooter for a long time, it should be charged at least every week
to keep the battery in a fully usable condition.
5. The ambient temperature will affect charging time. Charging time will be longer in the
winter.
6. After charging, do not leave the charger socket plugged in to the scooter, as this will
cause a power drain on the scooter and temporarily reduce its range.