2
GKS20
PRE ASSEMBLY
UNPACKING
1. Cut the straps, then lift the box over the unit and unpack.
2. Carefully remove all parts from the carton and inspect for any
damage or missing parts. If parts are damaged or missing, contact
your dealer immediately.
3.
Locate the hardware package. Remove the tools first. Remove
the hardware for each step as needed to avoid confusion. The
numbers in the instructions that are in parenthesis (#) are the
item number from the assembly drawing for reference.
4. This unit requires a 110V 15 amp dedicated line to function
safely. Using an alternate source will damage the machine. The
220V version requires a 220V 10 amp dedicated line to function
safely.
TOOLS INCLUDED:
Allen Wrench
Combination M5 Allen Wrench
& Phillips Head Screw Driver
PARTS INCLUDED:
2 Uprights
2 Handlebar Covers (L & R)
1 Upright Support
2 Handlebar Bracket
1 Console
1 Safety Key
1 Console Support Bar
1 Deck
1 Power Cord
1 Hardware Kit
1 Lubricant
Содержание GaitKeeper GKS20
