Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Wheelchair provides:
•
A comfortable transportation and storage thanks to its crossed frame structure and wheels with a quick-
release axle (optional)
•
Easiness of maneuvering
•
Easy transfer to - and out of the wheelchair
•
The durability and the solidity of the structure
•
The wheelchair is made of corrosion-resistant powder-coated steel.
The wheelchairs consists of the following elements:
1. Push handles – Enabling the attendant maneuvering the
wheelchair.
2. Armrest – It is used as a comfortable support of forearms.
The armrests can be lifted which facilitates getting in and out
of the wheelchair.
3. Footrest – The removable footrest is a safe and comfortable
support for legs. The footrest is adjustable in length.
4. Cross (under the seat) – thanks to it the wheelchair can be
easily fold for transportation and storage.
5. Brake – Pushing of brake lever towards front causes its
activation and protects the wheelchair against unforeseen
movement and rolling down the slope.
6. Footplate – User’s feet rest on it. It is possible to lift up the
footplate, which can ease getting in and out of the
wheelchair.
7. Backrest – Made of smooth incombustible material, enabling
also easy cleaning.
8. Seat – Made in similar way to the backrest.
9. Main wheels – Majority of the user's weight rests on these 24
inches pneumatic/PU puncture proof wheels.
10. Push rim – Thanks to push rims fastened to main wheels self propelled drive of the wheelchair is possible.
11. Quick-release axle (optional) – With this function wheels can be easily taken off, which facilitates the
transportation of the wheelchair.
12. Front wheels – 8 inches turning wheels are installed on rotating forks, which makes maneuvering of the
wheelchair possible.
WARNING!
Always pull both brakes, if you do not move on the wheelchair.
WARNING!
Do not put fingers between the wheel and the push rims. It threatens the injury of the palm.
Function description
Footrests
Standard footrests can be disassembled or pushed away on side.
To rotate and disassemble the footrest, first unblock it by pressing the safety-lock
lever (1), then turn the footrest outside and pull it upwards (4). The footrest
assembling should be performed in reverse order by inserting it in base of frame
and turning it inwards. The safety-lock will block automatically.
The wheelchair is equipped with height-adjustable footrests. To adjust their length
one should loosen a screw (2), press the locking button (3) and adjust the length of
the footrest by sliding the lower tube up or down so that the button pops into the
correct hole, and then tighten the screw.
During using the wheelchair outside, the footplates must be placed on height of
minimum 4-5cm from the base. In addition, the footrests posses the ability of
flipping the footplates upwards (4), which facilitates getting in and out of the wheelchair and also disassembling the
footrests.
WARNING! You should never climb the footrests, it can cause falling over the wheelchair. You should
never lift the wheelchair grabbing the footrests.
Rev. 07-22
17/40
UM-271540-MULTI_20220722
2
1
3
4
