Maintenance
Although this monitor requires little care, you can still maintain its condition and performance
by following these steps:
• Keep the system away from excessive moisture, extreme heat or cold, and magnetic fields.
• Occasionally clean the monitor screen with a damp soft cloth.
Should you experience any problem with the system please refer to the troubleshooting guide
prior to returning your system for repair.
Note 1:
The user should not attempt to service the unit beyond that described in the operating
instructions. All other servicing should be referred to qualified personnel.
Note 2:
Do not expose the unit to water or excessive moisture. This could cause electrical
shorts, fire or other damage.
Troubleshooting
Symptoms
Solutions
Unstable Image
• Low-Voltage – Check Battery
• Check Generator
• If the systems is wireless move vehicle to
another location, as the problem may be
caused by outside interference.
Cloudy Image
• Clean Dirty Camera Lens
• Clean Dirty Monitor Lens
• Adjust Contrast
• Adjust Brightness
Only qualified personnel should remove the cover or service this unit. The warranty will become invalid
if factory security seal is broken.
No Power/Picture
• Check Fuses
• Check if AV Cable is Properly Connected
to Monitor
No Sound
• Check Volume Level and Audio
Connection
No Color
• Check Color Level Settings
Monitor Does Not Display Image When
Vehicle is in Reverse
• Check the Green Reverse Trigger Wire for
Proper 12 Volt Connection.
• Check Video Inputs to Ensure they are
Properly Connected
11
