©
MobileRepeater.co.uk
Unit 1A Learoyd Road, Mountfield Industrial Estate, New Romney, Kent TN2 8XU
Tel -‐ +44(0)8082 344257, Email – [email protected]
System Commissioning
Before turning the repeater unit on please ensure that you have the connectors for
the outdoor aerial and the indoor whip aerial fastened firmly.
Connect the mains power to the DC adapter and connect the DC adapter cord to the
power input of the repeater unit. When active the red LED will glow ON. If you have
a
strong
outdoor signal level you will see the green LED come on as well at which
point you should see a signal come through on your mobile phone.
Once the base unit is on you can re-‐boot your mobile phone and check to see if it is
receiving a signal. Try placing a test-‐call to someone or to your voice mail to see if
you can call out.
If you are able to place calls out (and receive calls) your repeater is working
properly. You can adjust the direction of the external aerial to try and maximize the
indoor signal coverage. Mobile Repeater also supplies signal splitters and indoor
coverage aerials that can be used to distribute signal over a building with multiple
areas or heavy partition walls.
If you are not able to place calls due to a low outdoor signal level you may need a
higher gain external aerial.
If you are not able to place calls but you have a strong signal at the location of your
external aerial please review the trouble-‐shooting tips below for more information
or please contact Mobile Repeater customer support for technical advice.
