manualshive.com logo in svg

MobileAccess 850A1, Руководство по установке и настройке

Поделиться
Скачать
MobileAccess 850A1 Скачать руководство пользователя страница 27

MA 850A1 Installation and Connections 

MA 850A1A1 Installation and Configuration Guide 

15

 

 

3.3 

MA 850A1 Installation and Connections 

MA 850A1 may be installed in the following configurations: 

•

 

Wall mount standalone – mounted directly on the wall with four screws 

•

 

Mounted onto an MA 1000 RHU 

•

 

Mount as add-on to an MA 1000 RHU with an MA 1200 add-on unit 

•

 

Add-on to a MA 2000 system  

NOTE:  

It is recommended to record the location of the units according to the MAC addresses 

on the sticker at the rear of the units near the Ethernet port. 

In a wall-mount standalone configuration, MA 850A1 is mounted to the wall using four screws. 
When mounted to another MA remote (MA 1000 with or without MA 1200, MA 2000), a special 

bracket

 and set of accessories is used.  A different bracket and set of accessories is used for 

each type of installation. 

Note:

  Use SMA wrench for the SMA connectors, 

do not

 over tighten the connectors. 

3.3.1 

Wall Mount Standalone 

NOTE: 

Although it is not required for a stand-alone installation, it is recommended to set the 

supplied cable 

705102101

 aside (usually used when MA 850A1 is installed in an add-on 

configuration).You will need it if you want to upgrade your system to provide additional coverage 
options. 

1.

 

Mount the MA 850A1 on the wall using four screws. When mounting, 

consider the following: 

•

 

The type of screws used to mount the unit must suit the type of wall construction 
(cement, bricks, etc.) so that the mount is secure. 

•

 

The position of the APs and required cable connections. 

2.

 

Connect the 

power

 (

 

2.3.4). 

3.

 

Connect the 802.11a/b/g Access Points to the corresponding ports on the 
MA 850A1 rear panel (section 

 

3.4). 

4.

 

Connect the coax 

antenna

 cables to the MA 850A1 unit antenna ports on 

the MA 850A1 front panel (section 

 

3.6). 

5.

 

Fit 50 ohm terminators on all unconnected SMA, AP and antenna ports. 

6.

 

Connect the network connection to the MA 850A1 rear panel network port. 

NOTE: 

Each unit is pre-assigned an IP address. The address can be modified anytime through a 

remote connection according to the procedure described in section 

 

4.2.1).   

 

Содержание 850A1
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды