Mounting Bracket & Mounting
PASSIVE
2
9
1. Mini-jack connector: Transmits GPS tracking information to the
PASSIVE
2.
2.
GPS Antenna: The GPS (Global Positioning System) antenna tracks your
current location in relation to satellites orbiting around the globe.
The GPS antenna records information onto the SDHC memory card.
When watching videos with the
PASSIVE
2 Viewer, you can track the location
and speed of your vehicle on Google Maps.
NOTE: The built-in GPS antenna DOES NOT act as a portable navigation system.
The purpose of the GPS antenna on the mounting bracket is to track
your location, and transmit the information to the SDHC memory card
only. See “Enabling Google Maps View”.
3.
Mounting Bracket Screws: Tightens and loosens the mounting bracket elbow.
Twist screws clockwise to tighten, counter clockwise to loosen.
2
1
3
4. Mounting the
PASSIVE2
at the correct angle allows the unit to receive optimal
GPS reception and recording angles.
NOTE: Apply double-sided adhesive to the mounting
bracket base, and orient unit upright before
mounting .
To mount your
PASSIVE
2 for the first time:
a. Secure unit
to the right of your rear-view mirror.
Position the unit so that it does not interfere with your view.
b. Press and hold the mounting base firmly to the windshield for three seconds to
secure the unit in place.
c. Plug in the car adapter to the
PASSIVE
2 and into the cigarette lighter to power up
REMINDER: The mounting bracket adhesive has a powerful bond to surfaces.
Double-check the mounting position before securing in place.
The Driver-View
Camera adjusts to three angles. Push camera up or down to lock in place.
d. Adjust the angle of the mounting bracket by loosening the screws on the side .
Tighten screws to secure position.
NOTE: The
PASSIVE
2 takes 30 seconds to start up.
Wait for the GPS LED to glow solid green, followed
by a beep before driving. The REC and POWER LEDs
glow solid red. During normal operation, the REC,
GPS and POWER LED will always be on.
