BASIC INSTALLATION
8
1. Insert the SDHC memory card.
a. Open the SD memory slot cover
b. Insert the SDHC memory card into the slot
with the sticker face up, and upright.
Push memory card firmly until you hear a click.
Memory card locks in place.
c. Close SD memory slot cover.
NOTE: The SDHC memory card should slide smoothly into the memory slot.
The SDHC memory card is designed to go in one way only. Do not force
in the card.
2. Install the mounting bracket
a. Stick the double-sided adhesive onto the base
of the mounting bracket.
b. Plug the mini-jack connector from the mounting
bracket into the side of the
PASSIVE
2 labeled GPS.
c. Slide mounting bracket upwards on the back of
the device . The mounting bracket locks in place.
d. Connect the car adapter to the
PASSIVE
2 and cigar lighter.
3. Mount the
PASSIVE
2
NOTE: See “Mounting your
PASSIVE
2” for mounting tips.
a. Orient the unit upright .
Firmly press the mounting bracket onto the windshield.
Hold for three seconds to secure.
b. Loosen the screws on the mounting bracket to adjust the
mounting angle. Tighten screws to secure mounting position.
CAUTION: Always have a clear view of the road. Adjust the positioning of the
PASSIVE
2 so that it does not affect your driving reflexes and traffic
awareness. Check local laws before mounting unit on windshield.
