Mobile One HMP-1 Series, Инструкции и руководство пользователя

Страница: 4 / 12

NB: The Headset Ear Cups must be fitted over your ears
covering and enclosing them completely
The Headset should be fitted so that the horizontal axis of the Ear Cup bisects the
approximate tip of the nose of the wearer. This usually means the Headband of the
headset will be located directly above the ears, however the headband may be
adjusted slightly forward or rearwards for maximum comfort. See figure D below.
Note:
1. The horizontal axis at the nose
shown as the solid black line
2.
The vertical position of the
Headband on the top of the head
as compared the vertical white
dotted line
Figure D
STEP BY STEP USER GUIDE
NOTE: The Headset is intended to be worn with the microphone
and cable on the left side of the head.
STEP 1 Adjusting position of the Mic. Boom
Release the holding tension of the
Microphone Boom (Figure C, item 5)
by unscrewing clamping nut (Figure C,
item 6) counter clockwise just enough
to be able to move the boom. This usually
takes less then a one quarter turn. You
will see that the boom can rotate up or
down to select the best positioning
angle. It can also slide in or out to select
the correct length for your head size. Re-
tighten nut after adjustments
(see figure 1.1, right)
Figure 1.1
4