- 19 -
2.5
Commissioning
MB7500 provide an output voltage of AC 110V / 50Hz. Only devices
which require this voltage may be plugged into the sockets. Devices,
which require other voltage, for example 12V direct voltage, could be
irreversibly damaged or may cause fires.
Before you start the engine of the vehicle, make
sure, that the vehicle is secured from rolling off
with the hand brake or something similar.
Closed rooms require adequate ventilation.
Do not leave your vehicle or the MobiE System
unattended for any length of time, when in
operation.
2.6
Commissioning of MB7500-110 with
MB6001F-110:
Start
•
Start the vehicle engine
•
Adapt the speed via the speed control (accessory)
•
Press the “ON” button
LED (green) I/O lights up
Operation
•
Voltmeter shall indicated 110..115V
110..115V are available at the sockets
•
Current, or respectively, the output can be drawn.
Output level is displayed on indicator “A“
Switch-off
•
Press the “OFF” button
LED (green) I/O goes out
•
Switch-off speed control
Turn-off the vehicle engine
Warning
