EN
Disposal
MCF40, MCF60
18
10
Disposal
➤
Place the packaging material in the appropriate recycling waste bins
wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
When operating from
the DC power
socket:
The ignition is on
and the cooling
device is not work-
ing.
The fitting of the DC
power socket is dirty.
This results in a poor
electrical contact.
If the plug becomes very warm in the
DC power socket fitting, either the fit-
ting must be cleaned or the plug has
not been assembled correctly.
The fuse of the DC
plug has blown.
Replace the fuse (8 A) of the DC plug
with one of the same rating (chapter
“Replacing the DC fuse” on page 16).
The DC fuse inside
the cooling device
has blown.
This can only be repaired by an
authorised repair centre.
The vehicle fuse has
blown.
Replace the vehicle's DC power
socket fuse. Please refer to the oper-
ating manual of your vehicle.
The display shows
an error message
(e.g. “Err1”) and the
cooling device does
not cool.
The appliance has
switched off due to an
internal fault.
This can only be repaired by an
authorised repair centre.
Fault
Possible cause
Suggested remedy
MCF40-MFC60--O-AUS.book Seite 18 Mittwoch, 9. Januar 2019 4:41 16
