Mobicom Telematics
–
GL600 GPS Smart Lock User Guide
16 / 20
Copyright ©
2019 Shenzhen Mobicom Telematics Co.,Ltd. All rights reserved.
7.5 Description of product working Process
Normally, if there is no any external wake up source, the device will go to sleep ,and wake up
according to RTC wake up interval(default is 30 minutes).
When device detected ‘swipe the RFID tags’, ‘Back Cover Opened’, ‘vibration’, ‘lock rope disconnect
/connect’ ,’RTC time interval’,GL600 device will be waken up , and worked about 10 minutes, during
the 10 minutes, it will be uploading data according to Data uploading interval(default is 30 sec).
7.6 Lock and Unlock Device
7.6.1 Lock the device
1.When inserted the two Probes of lock rope inside GPS lock, the GL600 device will lock itself
automatically. Meanwhile User will hear the Motor running, Buzzer ring twice and GPS led blinking
once.
2.If didn’t lock successfully, Buzzer ring every 1 sec, GPS led keep blinking, Stopped until lock rope
inserted or 60 sec later
7.6.2 Unlock the device
7.6.2.1 Unlock the device by SMS command
Send below SMS command to the SIM card number inside GL600 device.
(P43,888888)
When unlock successfully, Buzzer ring 3 second continuously, GPS led blinking 3 sec, User can take
out the lock rope.
7.6.2.2 Unlock the device by authorization RFID tags
Customer will get 2 authorization RFID tags in the package. When Power on the device, Swipe one of
the authorization RFID tag, will unlock the device. When unlock successfully, Buzzer ring twice
，
GPS
led blinking once, User can take out the lock rope.
If swiped with a unauthorized RFID tag, Buzzer ring 3 second continuously, GPS led blinking 3 sec,
and User can’t take out the lock rope.
Note:
Don’t swipe the two or more RFID tags at the same time, Otherwise ,can’t unlock the lock rope.
