Memory Function
Memory Recall
•
You can recall up to 30 prior measurements stored in memory.
•
When the device is ON, press once briefly on the MEM Button, then pass it again to show the last
measurement accompanied by symbol.
•
The symbol and symbol will appear with each measurement stored in memory to indicate
whether a person or object temperature was taken.
•
Each press of the same button recalls a previous measurement.
Memory Deletion
•
Under power ON status, you may press and hold MEM Button
for more than 3 seconds to delete all the readings.
Care and Maintenance
Lens / Measurement Sensor
•
Gently clean with an alcohol swab. Do not use water to wash the
thermometer lens directly.
Thermometer
•
Clean with a soft, dry cloth. Do not use water to rinse the device.
Product Identification
Measurement Sensor
LCD Display
Red LED Light for Fever Buzzer
Memory Button MODE Button
Power / SCAN Button
Battery Compartment lid
