Mobeye WaterGuard CM2300, Руководство пользователя портала

Страница: 15 / 32

14
4.7 SWITCHING ON/OFF
After the previous steps the Mobeye WaterGuard is ready for use. It is armed
(switched on) automatically.
In order to switch off (disarm) the Mobeye WaterGuard:
- Press the on/ off button at the upper side for 1 second. The green LED switches
off to indicate the disarmed status.
In the disarmed status the Mobeye WaterGuard will not send alarm notifications.
The functions sending test messages
and sending a ‘low battery’ message, are
still active.
In order to switch on (arm) the Mobeye WaterGuard:
- Press the on/ off button at the upper side for 1 second. The green LED blinks
once every 3 seconds (battery-powered) or
stays ‘on’ continuously (in case of an
external power supply).
If powered externally (GSM is open), switching can be done via SMS commands:
SMS command to switch on: CODE ARM
SMS command to switch off: CODE DISARM
example: 1111 ARM
The status can be requested via SMS command CODE STATUS?.
4.8 CONFIRMATION OF THE ALARM MESSAGE
When the system is triggered it will send alarm notifications. First a message is sent
to the portal (and forwarded from there), followed by a phone call. When you pick up
the phone, you will hear beeps. It is possible to acknowledge the phone call by
answering the phone and pressing any key. The other alarm numbers will not be
called afterwards. This works for most telephones.