Mobeye CM4300FS, Руководство пользователя

Страница: 11 / 32

10
3.6 NETWORK CONNECTION AND PROGRAM MODE
After placing the batteries (and external power) the Mobeye WaterGuard-FS
will search for the network. The outside LED flashes green and red. This
process normally takes 10-30 seconds, in a new device this can take some
minutes. When the network has been established the LED will first blink
green rapidly and next stay green (or flashes 1 sec. on/1 sec. off in case the
unit has not been configured yet).
In a battery-operated unit a time-out occurs after 3 minutes,
after which the communication module switches off in order
to save the batteries. In this low power mode the LED flashes
once per 3 seconds. It will search for network connection
once it needs to send notifications. It can also been forced to
establish a network connection by re-inserting the batteries
or pressing the button at the back for 5 seconds.
If the WaterGuard-FS is connected to an external power supply, it has
continuous network connection and is permanently in program mode.