Moberg Fireplaces GS-18-3, Инструкция по установке и эксплуатации

Страница: 7 / 16

b. Check for p f .
h of sensor tip; if not, adjust at control valve.
c. Chec
g metal parts:
ii. Ceramic sed to high heat from direct flame impingement:
iii. Ceramic
iv. Check i
og Layout for Georgian Grating:
ilot lame impingement of sensor tip
i. Pilot flame should envelope top
3
/
8
to ½ inc
k for grounding of sensor.
i. Foreign object groundin
•
Remove object.
insulator is expo
•
Bend bracket away or lower assembly at mounting point.
insulator cracked or damaged:
•
Replace pilot/igniter assembly.
gnition wire.
L
ARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts W
specifically approved with this appliance may result in property damage, personal injury, and void
warranty and ASNI listing
c urse
-S4 (21” x 3.75” x 4.75”) log
First o
Front Log: GL
Rear Log: GL-S18 (18” x 4” x 4.75”) log
econd Course
(15” x 3” x 3”) log
log
Third Course
1M11 (11” x 3” x 3”) log
S
Left Log: GL-S11
Right Log: GL-S11M12 (12” x 3” x 3”)
Top Log: GL-S1
Page 7 of 16