©
MOBATIME BE-801181.00
Setting the DC or DSC digital clock:
the digital clock has to have its own IP address set manually or using DHCP
enter the clock main MENU and move to SW version, hold long both push-buttons placed on
the frame or button DISP on the IR controller - service menu will be entered
set the C5 item of the service menu to 7 and open the submenu
set gradually the 4 octets of the thermometer IP address in the submenu and confirm the setting
close the service menu
within approx. 3 minutes the digital clock should start displaying the measured temperature
for both temperature sensors can be set the correction of measured temperature in range
-9 ÷ +9°C (°F) in the submenu of the P12 main menu item
enter the submenu by pushing the SET button on the IR remote controller or by long push of the
left button on the clock frame when the P12 item is displayed
the c1: 0 is displayed, correction value for temperature 1 s blinking, the value can be changed
using +- buttons on the IR controller or by pushing the right button on the frame
after pushing the right arrow button on the IR controller or left button on the frame the c2: 0 is
displayed, correction value for temperature 2 is displayed, value can be changed the same way
as in previous point
saving the correction values and return to the main menu item P12 is done be pushing the OK
button on the IR controller or by long push of the left button on the frame
Notice:
For detailed information visit the manufacturer's website www.papouch.com
Warranty and repair
device meets the following standards:
IEC 60950-1 ed. 2 - with respect to electrical safety
EN 55022 class B, EN 55024 - with respect to EMC
The warranty does not apply to defects caused by
- Improper handling or intervention
- Chemical effects
- Mechanical damage
- The intervention of external events (natural disaster, etc.)
