© MOBATIME
5 / 16
800945.06
1.4
Housing
•
single- or double-sided design, flush or wall mounting (only for single sided clock
design), ceiling suspension
•
simple assembly using the magnetic system
•
stainless steel clock frame (1.4301, AISI 304, brushed) particularly resistant to
acids, cleaning and disinfectant, protected against direct sprays from all direction
(limited ingress permitted) and dust
•
other kind of stainless-steel material on request
•
easy installation
•
structural depth 65/95 mm of single/double sided design respectively
•
anti-glare polycarbonate front glass prevents reflections and improves the
readability
•
mineral glass on special request
•
working temperature 0 to +
50° C
1.5
Stopwatch
•
counting upwards from zero, up to 24 hours
•
counting downwards from a specified value, with stop at zero, with automatic
restart or counting into negative values
•
display of intermediate time values, "freezing" of display, cumulated intermediate
time
•
counting in steps of 1 minute, 1 second or 1/100 seconds
•
operation via keyboard or remote IR controller
•
possibility to connect another display unit(s)
•
possibility of parallel switching over into the time/date or temperature display mode
1.6
Clock and Stopwatch control
•
operation of the clock and stopwatch operation via stainless steel keyboard or
remote IR controller
•
Accessories
•
DCF 77 signal receiver
•
temperature sensor with protection degree IP 66
•
stainless steel keyboard for clock and stopwatch control, cable 5 m, handheld
•
stainless steel keyboard for clock and stopwatch control, flush mounting
•
remote IR controller for clock set up and stopwatch control
1.7
On request
•
internal relay
– relay can switch for specified duration, when the stopwatch in the
countdown mode reach the zero.
