Mobatime 122031, Монтаж и инструкция по эксплуатации

Страница: 63 / 124

© MOBATIME 63 / 124 801214.10
6.5.29 SNMP
For a description of SNMP functionality, see also chapter “9 SNMP“.
DTS 4160.grandmaster Moser-Baer AG
====================================
SNMP CONFIGURATION
1 SNMP mode 2
2 Alarmmask for SNMP ff ff ff ff ff ff ff ff
3 DTS location
4 Contact information
5 SNMP V1/V2c security configuration
6 SNMP V3 security configuration
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration

8 SNMP
1. Mode. 0=off, 1=V1/V2c/V3, 2=V2c/V3, 3=V3.
SNMP information of MIB 2 is always available.
Notice:
To send out MIB-2 traps, the trap community and the destination address
must at least be configured in menu ’2. Configuration’

’3. Alarms’

’3.
Traps’. See also chapter “6.5.23 SNMP traps".
2. Alarm mask for SNMP status (see chapter "6.5.21 Alarm mask"). The modifications
will be saved or restored one menu level higher in “SNMP CONFIGURATION“.
3. DTS Location information, which is displayed in SNMP management tool.
4. Contact information, which is displayed in SNMP management tool.
5. Configuration of SNMP V1 / V2 c (specific settings). See chapter “6.5.31 SNMP V1
/ V2c“
6. Configuration of SNMP V3 (specific settings). See chapter “6.5.32 SNMP V3“
Notice:
Each configuration change leads to a restart of the DTS SNMP Agent.
MOBA-NMS: Tab: SNMP