Mobatime 121059, Монтаж и инструкция по эксплуатации

Страница: 92 / 124

© MOBATIME 92 / 124 801203.10
The ConfigChangedTime variables show the time of the last change of the relevant
configuration group as TimeTicks value in 1/100th seconds. The management system
can decide on the basis of these time values, which configurations need to be
reloaded. The groups and their parameters are listed in appendix “G Parameters“.
9.3.5 Alive Notification [dts4210Alive]
Sent out in a configurable interval.
This Notification is always sent out, as soon as SNMP and the alarm traps are
activated and a destination address is configured.
The Notification sent out contains the following data:
Field Type Size Description Example
dts4210SysStatus Unsigned Int 4 Bytes Contains the internal
system status 66309
dts4210SysAlarms Byte Array 8 Bytes 64 Bit Alarm flags
1.Byte Bit 0..7
2.Byte Bit 8..15
::
8.Byte Bit 56..63
FFF870FF.FFFFFFFF
¦ ¦ ¦
¦ ¦ 5.Byte
¦ 2.Byte
1.Byte
9.3.6 Alarm Notification [dts4210Alarm]
Sent out if alarm status changes, i.e. Notification is sent out when an alarm flag is set
or deleted.
This Notification is always sent out, as soon as SNMP and the alarm traps are
activated and a destination address is configured.
The Notification sent out contains the following data:
Field Type Size Description Example
dts4210TrapAlMsgErrorNr Byte 1 Byte No. of the alarm bit (0..63) 3
dts4210TrapAlMsgErrorState Byte 1 Byte 0 = alarm bit was deleted
1 = alarm bit was set
1
dts4210TrapAlMsgErrorTime Unsigned
Int
4 Bytes PC-time in seconds since
01.01.1970 00:00:00
946684805
dts4210TrapAlMsgErrorText Text 59 Bytes Error text
Failure supply 1