MOBA R.3CHS, Руководство пользователя

Страница: 20 / 28

20
3.3 Reading The LED Display
The bucket/blade is too high, adjust downwards.
The bucket/blade is slightly above grade, adjust
downwards.
The bucket/blade is on grade.
The bucket/blade is slightly below grade, adjust
upwards.
NONE
LED CLUSTER LIT MEANING
Top or bottom LED cluster
flashing SLOWLY
Top and/or top-centre
LED clusters
flashing RAPIDLY
Top-centre and centre
LED clusters
flashing RAPIDLY
Centre LED cluster
flashing RAPIDLY
Bottom centre and centre
LED clusters
flashing RAPIDLY
The bucket/blade is too low, adjust upwards.
Bottom and/or bottom-centre
LED clusters
flashing RAPIDLY
The laser beam is not striking the Laserguide. Adjust
the bucket /blade up or down to locate the beam. If
the beam can’t be located, may need to adjust the
transmitter up or down and repeat setup (section 3.2)
The laser beam has gone past the top most or bottom
most section of the Laserguide’s receiving area.
Move the bucket/blade in the direction indicated by the
slowly flashing cluster. See also section 3.3.1.
TABLE 5
© Copyright MOBA Mobile Automation Australia Pty Ltd
Installing and Using the Laserguide