Mo-vis Stealth Products Twister, Руководство пользователя

Страница: 13 / 24

6
Installation Instructions 9.0
Twister On Bent Tube 9.3

Diameter of Twister rod-6mm (.236in)

Length of Twister rod-100mm (3.94in)

Each Bent Tube is provided with a Quick-to-Mount clamp that splits in 2 parts in
order to allow the cable to run through the switch. It can be mounted on a 6mm rod.

Compatible with any joystick but cannot be mounted onto the All Round Joystick.
1. Slide Q2M Clamp onto and 6mm rod (compatible with Power Chin Boom, C-Rod or S-Rod).
2. Adjust the height of the twister switch by sliding it along the split clamp provided.
3. When the switch is at the desired height, use a 3mm T-Handle to tighten the clamps on the
tube.
4. Plug into the power or mode inputs on the joystick.
Twister Basic 9.4

The Twister is mounted on a plate of metal/plastic with 2 screws. A regular Phillips
Screwdriver is required to mount screws.

2 Types of screws delivered:
- Diameter 2.2mm (0.087 in)
Length 6.5mm (0.266in) for sheet thickness 0.5mm (0.02 in) to 2mm (0.079 in)
- Diameter 2.2mm (0.087 in)
Length 9.5mm ( 0.374in) for sheet thickness 3mm ( 0.118 in) to 4.5mm ( 0.177 in)

The screws are self-tapping metal screws (A2 stainless steel).

Compatible with any joystick.