CAUTION:
Do not mount the unit using the screw holes at the
bottom of the unit.
3
Place and secure all cabling on the power chair.
4
Place a power on/off (pwr) and/or mode (in) switch, secure their cabling
and insert their connections.
CAUTION:
Before inserting a connector, remove the protective
cover. If the connections are not used, always put or keep the
protective covers in.
CAUTION:
This is Class I Medical Device (
MDR 2017/745
). All
accessories, including switches, must also comply with the
MDR
2017/745
regulations (e.g. the mo-vis
Twister
, tested according to
EN12184
standards).
5
Connect the cabling to the wheelchair electronics.
CAUTION:
All wheelchair electronics must be switched off during
installation.
14
14 Heavy Duty Joystick Installation Manual
