MO-EL FURBI, Использование и обслуживание

Страница: 8 / 24

8
firmly fix the appliance using the screw supplied.
5. Assemble the wall support joining its two halves together by fitting
the screws supplied into holes (
A
).
FUNCTIONING
1.Remove the hairdryer from its support with the handle.
2.Switch the appliance on using the “ON / OFF” switch (
C
) located on
the wall support.
3.Press button (
D
) at the front of the handle for warm air. Warm air will
continue to flow as long as the button is held down.
4.Press the “MIN / MAX” switch (
E
) at the rear of the handle to adjust
the power of the appliance.
5.Two power sockets are incorporated into the wall support, one for
over 230 V (
F
) and one for less than 115 V (
G
), which can be used for
electric shavers and similar appliances.
The power sockets on this appliance may be used for appliances with a
power rating no greater than 10 W.