MMD PowerPro Inverter Generators • IGR6000H (091615)
MMD PowerPro Inverter Generators • IGR6000H (091615)
Page 14
Page 15
4. Starting The Engine
b. Pull the choke knob out to the CLOSED position
Do not use the choke if the engine is already warm or the ambient air
temperature is high.
CHOKE KNOB
FUEL SWITCH
n
When starting the generator after adding fuel for the first time or after long term
storage, or after running out of fuel, turn the fuel valve lever to the "ON" position,
then wait for 10 to 20 seconds before starting the engine.
4. Starting Procedure
a. Turn the fuel valve lever to the ON position.
Disconnect any load from AC receptacle before starting engine.
ENGINE SWITCH
ON
ON
OFF
OFF
START
START
ENGINE SWITCH
c. Insert the engine key and turn the engine switch to ON position.
d. Turn the engine switch to the START until the engine has started.Do not operate
the starter for more than 10 seconds.
