MLis MLB-E4200 Series, Руководство пользователя

Страница: 34 / 98

34
Step2. Select Configuration -> VLAN -> Static VLAN. Create a VLAN with VLAN ID 100. Enter a VLAN
name in the Name field.
Step3. Assign VLAN tag setting to or remove it from a port by toggling the check box under an individual
port number. The tag settings determine if packets that are transmitted from the port tagged or untagged
with the VLAN ID. The possible tag settings are:
Tag All Specifies that the egress packet is tagged for the port.
Untag port vlan Specifies that the egress packet is untagged for the port.
Untag All
Specifies that a
ll frames, whether classified to the Port VLAN or not, are
transmitted without a tag.
Here we set tagged VLAN100 on Port 1 and Port 2, untagged VLAN100 on Port7.
Step4. Transmit untagged unicast packets from Port 1 to Port 2 and Port 7. The MLB-E4200 should tag it
with VID 100. The packet has access to Port2 and Port 7. The outgoing packet is stripped of its tag to
leave Port 7 as an untagged packet. For Port 2, the outgoing packet leaves as a tagged packet with VID
100.
Step5. Transmit untagged unicast packets from Port 2 to Port 1 and Port 7. The MLB-E4200 should tag it
with VID 100. The packet has access to Port1 and Port 7. The outgoing packet is stripped of its tag to
leave Port 7 as an untagged packet. For Port 1, the outgoing packet leaves as a tagged packet with VID
100.
Step6. Transmit untagged unicast packets from Port 7 to Port 1 and Port 2. The MLB-E4200 should tag it
with VID 100. The packet has access to Port1 and Port 2. For Port 1 and Port 2, the outgoing packet
leaves as a tagged packet with VID 100.
Step7. Repeat step 4 using broadcast and multicast packets.