MIDI LOOP & SWITCH LS12/2
Instruction Manual 7
MARK L Custom Guitar Electronics
7
2.Rear Panel
The rear panel consists of 6,3 mm ‘jack’ receptacles used for connecting effects, audio
signals and control the amplifier and other devices
-
LINK OUT
-feed thru on front panel output
-
INPUT 1
-Effects loop 1-7 IN
-
OUTPUT 1
-Effects loop 1-7 OUT
-
INPUT 2
-Effect loop 8-12 IN
-
OUTPUT 2
-Effects loop 8-12 OUT
-
TUNER OUT
-transformer separated TUNER out socket
-
12 x
Send
-used for connecting the effect’s IN socket
-
12 x Return -
used for connecting the effect’s OUT socket
-
2 x Switch -
used for controlling the amplifier channels, tone etc.
-
GND/LIFT
switch used for separating ground from the housing killing the so-called
‘ground loops’
-
MIDI IN
used for Communications with a midi controller
-
MIDI OUT THRU
a MIDI bypass used for connecting and controlling (by a MIDI
SIGNAL) an additional device
- MIDI CHANNEL
switch used for switching channel from 1 to 16
-
POWER IN
Power supply socket for AC 9V/800mA
AC Plug 2,5mmx5,5mm
EXT POWER IN
for AC power converter 9VAC
AC Plug 2,5mmx5,5mm
PHANTOM POWER for FX25
