MIDI LOOP & SWITCH LS12/2
Instruction Manual 10
MARK L Custom Guitar Electronics
10
The LS10/6 is operated by MIDI CC (Control Change) or MIDI PC ( Program Change )
commands over 16 channels. There are 128 MIDI CC commands used worldwide (CC0-
CC127). Each commands has a VALUE (0-127) in which “0” stands for OFF while “127”
stands for ON.
MIDI CHANNEL
is a dial used for changing MIDI channels from 1-16
0 - CHANNEL – 1
1 - CHANNEL – 2
2 - CHANNEL – 3
3 - CHANNEL – 4
4 - CHANNEL – 5
5 - CHANNEL – 6
6 - CHANNEL – 7
7 - CHANNEL – 8
8 - CHANNEL – 9
9 - CHANNEL – 10
A - CHANNEL – 11
B - CHANNEL – 12
C - CHANNEL – 13
D - CHANNEL – 14
E - CHANNEL – 15
F - CHANNEL – 16
To save a setting to a
MIDI program change
:
-
Select a MIDI program number with your MIDI footswitch or controller.
-
Manually select the desired state of each Audio Loop using the MLC LS10/6’s front
panel buttons.
-
Hold down the STORE button until the LEDs flash.
MIDI Control Change
Available, are a few factory commands used for activating the effects loop or switches in a
various manner.
The below chart portrays the available factory combinations:
Commands used for the LS10/6:
