• Replace the luminaire onto the baseplate and fasten the three grub screws
• Unscrew the bezel, insert a suitable GU10 lamp and carefully replace the bezel ensuring that the seal is in
place and not damaged
• Switch on and check for correct operation
This product is not suitable for installation in or near a coastal or marine environment.
WARNING
Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the
product.
Do not use any source of high-pressure washers to maintain or clean this luminaire.
If installed outdoors, a light film of acid-free oil is recommended after installation and maintained periodically
(2-3 times a year) to aid corrosion prevention.
This product is dimmable dependent on lamp type.
This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities
for where facilities exist.
GENERAL
