background image

INSTALLATION & MAINTENANCE MANUAL 

 

These instructions should be read carefully and retained after installation by the end user for future reference 

and maintenance. 

These instructions should be used to aid installation of the following product: 

SUR5LED 
SAFETY 

 

This product must be installed in accordance with the latest edition of the IEE Wiring Regulations 

(BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician 

 

Please isolate mains prior to installation or maintenance 

 

Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of 

the circuit cable, fuse or circuit breaker 

 

Please note the IP (Ingress Protection) rating of this luminaire when deciding the location for 

installation 

 

This product is Class I and must be earthed 

 

This product series is IP20 rated 

INSTALLATION 

Note - If this luminaire is being used in conjunction with an external PIR or sensor, please confirm with the 

manufacturer of the sensors that they are compatible with LED luminaires 

 

Provide power to the required point of installation  

 

Remove the diffuser by inserting a small plastic flat-headed tool into the frame (see Fig. 1) 

 

 

 

 

 

Fig. 1 

 

 

 

 

 

Using the luminaire as a template, mark the location for, and drill the fixing holes ensuring not to 

infringe with any gas/water pipes or electrical cables  

 

Ensuring correct polarity is observed, carefully wire as shown in Fig. 2 

 

 

 

Fig. 2 

 

 

 

 

INSTALLATION

Note - If this luminaire is being used in conjunction with an external PIR or sensor, please 
confirm with the manufacturer of the sensors that they are compatible with LED luminaires

• Provide power to the required point of installation 
• Remove the diffuser by inserting a small plastic flat-headed tool into the frame (see Fig. 1)

• Using the luminaire as a template, mark the location for, and drill the fixing holes ensuring 
   not to infringe with any gas/water pipes or electrical cables 
• Ensuring correct polarity is observed, carefully wire as shown in Fig. 2

Fig. 1

Отзывы: