• Connect the luminaire to the mains supply ensuring the correct polarity is observed:
L – Live (brown), E – Earth (green/yellow), N – Neutral (blue)
• All earth connections must be made and maintained. Use green/yellow sleeving on earth
conductors that are not insulated
• Check all electrical connections are secure with no loose strands of cable
• Fit the unit into a suitable wall box taking care not to compress, damage, or trap any
cables, and secure with the screws provided
• Clip the front plate onto the main assembly ensuring the screwdriver notch is at the side
• Switch on and check for correct operation
WARNING
This product must be disconnected from the circuit if subjected to any high voltage or
insulation resistance testing. Irreparable damage will occur if this instruction is not followed.
