GENERAL
This product should be recycled in the correct manner when it reaches the end of its life.
Check local authorities for where facilities exist.
Clean the external surfaces with a damp cloth using a mild solution of detergent and warm
water only, do not use aggressive cleaning products or solvents which may damage the
product.
Do not use any source of high-pressure washers to maintain or clean this luminaire.
This product is dimmable dependent on lamp type.
• Tighten the compression gland ensuring a tight seal is made
• Refit the luminaire to the baseplate and tighten
• Remove the top of the luminaire by loosening the two Allen screws on the sides and
insert a suitable E27 lamp (max. 20W)
• Switch on and check for correct operation
WARNING
This product is not suitable for installation in or near a coastal or marine environment.
