•
Remove the baseplate from the luminaire by loosening the screws on the sides
•
When the concrete is set, fix the base plate to the threaded rods using the spring washers and nuts
provided (see Fig. 2)
Fig. 2
•
If fixing onto solid surface:
using the baseplate as a template, mark the location for, and drill the
fixing holes ensuring not to infringe with any gas/water pipes or electrical cables. Fix the baseplate
using suitable fixings (not provided)
•
Connect the luminaire to the mains supply ensuring the correct polarity is observed: Live (brown),
Earth (green/yellow), Neutral (blue) (see Fig. 3)
Fig. 3
•
Remove the baseplate from the luminaire by loosening the screws on the sides
•
When the concrete is set, fix the base plate to the threaded rods using the spring washers and nuts
provided (see Fig. 2)
Fig. 2
•
If fixing onto solid surface:
using the baseplate as a template, mark the location for, and drill the
fixing holes ensuring not to infringe with any gas/water pipes or electrical cables. Fix the baseplate
using suitable fixings (not provided)
•
Connect the luminaire to the mains supply ensuring the correct polarity is observed: Live (brown),
Earth (green/yellow), Neutral (blue) (see Fig. 3)
Fig. 3
Fig. 2
Fig. 3
• If fixing onto solid surface: using the baseplate as a
template, mark the location for, and drill the fixing
holes ensuring not to infringe with any gas/water
pipes or electrical cables. Fix the baseplate using
suitable fixings (not provided)
• Connect the luminaire to the mains supply ensuring
the correct polarity is observed: Live (brown),
Earth (green/yellow), Neutral (blue) (see Fig. 3)
• Remove the baseplate from the luminaire by loosening
the screws on the sides
• When the concrete is set, fix the baseplate to the
threaded rods using the spring washers
and nuts provided (see Fig. 2)
