These instructions should be read carefully and retained after installation by the end user for
future reference and maintenance.
These instructions should be used to aid installation of the following product:
EMRUN
GENERAL INSTRUCTIONS
• This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671)
and current Building Regulations. If in any doubt, consult a qualified electrician
• Please isolate mains prior to installation or maintenance
• Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of the
circuit cable, fuse or circuit breaker
• Please note the IP (Ingress Protection) rating of this product when deciding the location for installation
• This product is for indoor use only
• This product is Class I and must be earthed
• This product is IP20 rated
SAFETY
INSTALLATION
• Provide power to the required point of installation
• Remove the two screws on the end of the product (see Fig. 1) and remove the end cap and legend
Содержание EMRUN
Страница 1: ...INSTALLATION MAINTENANCE MANUAL EMRUN...
Страница 7: ...230V 50Hz IP20 Class 1 non Dim house Ta 0 45 D...