MKS Spectra-Physics Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 29

MKS Spectra-Physics Скачать руководство пользователя страница 15

©Newport Corporation

MKS Spectra-Physics Confidential

15

of

29

Accessory Kit Parts List

This manual, a packing slip listing all the parts shipped, and an accessory kit containing the items
listed below is shipped along with the laser system. Verify that all items are present. (Spectra-
Physics part numbers are listed in Chapter 11, “Field Replaceable Units (FRUs)”)

(1) 2.5 m (8 ft.) 3-wire AC power cord, no plug (the customer must provide and install the
plug for this power cord)
(1) European (German) power cord
(1) 5 m (16 ft.) LASER HEAD control cable, standard
(1) 5 m (16 ft.) SHUTTER control cable, optional
(1) Power supply parts kit (INTERLOCK jumper plug, LASER CONTROL jumper plug, two
keys, connector locks for AC connector, fuses (15 A, 250 V, slow-blow))
(2) 5 m (16 ft.) air hoses with connectors, standard
(1) USB memory stick containing the

Quasar

GUI software

(1) 3 m (10 ft.) Type A/B USB cable
(1) 5m (16 ft) Type A/A USB cable
Optional Chiller:

1)

AC 3-wire power cord, no plug (the customer must provide and install the plug for this
power cord)

2)

particle filter for the chiller (ships with chiller)

3)

5 m (16 ft.) water hoses with connectors, standard

Tooling Requirements

An adjustable wrench to remove the (4) 5/16” bolts
A 5/32” hex ball driver (length ~ 10")
A hoist with load capacity of 181 kg (400 lb.) to move the laser from the crate onto the table
where it will operate

«
...
13
14
15
16
17
...
»

Содержание Spectra-Physics






























Отзывы:

Нет отзывов