CONEX-LDS
Controller GUI Manual
4.5
Acquisition
4.5.1
CONEX-LDS Acquisition tab
In the Acquisition tab, two acquisition methods are available:
1.
Manual acquisition: “Manual trigger” button
2.
Dynamic acquisition: “Dynamic trigger” button (changes to “Stop” during
acquisition)
The dynamic acquisition rate depends on the polling interval defined in the
Configuration tab.
Dynamic trigger Button
This button starts running a succession of acquisition defined by:
•
A number of points defined by the “Nb points” field
•
The default delay value is set to 100 ms. This value is limited by the computer and
the communication rate. The save button allows saving the X and Y data as well as
the time. This time stamp will help get an idea of system performance by setting
the delay to 1 ms (minimum value). The maximum rate is in the range of some
tens of Hertz.
Manual trigger Button
This button triggers the acquisition of the current CONEX-LDS position (one shot).
Clear” button
This button clears all acquired positions.
Reset zoom Button
Resets the zoom scale.
EDH0331En1032 — 12/18
12
