manualshive.com logo in svg

MKS HPS LPV1-25-AC Series, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
MKS HPS LPV1-25-AC Series Скачать руководство пользователя страница 40

32

HPS

HPS

HPS

HPS

HPS

®

 Square Body LoPro

 Square Body LoPro

 Square Body LoPro

 Square Body LoPro

 Square Body LoPro

Seri es

Seri es

Seri es

Seri es

Seri es

32

8.1.8 Leaks from atmosphere when open

If leakage is detected from atmosphere when the valve is open, see section
8.3.5 on bellows failure.

8.1.9 Leaks from atmosphere at all times

If leakage is detected from atmosphere at all times, see section 8.3.5 on
bellows failure. If the bellows has not failed, refer to section 8.3.7 on
bonnet seal failure. Also see sections 8.3.10 on bonnet seal omission,
8.3.12 on improper assembly, 8.3.2 on body damage, and 8.3.3 on port
flange damage.

8.1.10 Air leaks from around piston when open

If compressed air can be heard or possibly felt escaping from the hole in the
center of the piston cover,but is not emanating from the vent in the actuator
cylinder, see section 8.3.8 on piston seal failure.

8.1.11 Air leaks from vent hole while opening

The slot inbetween the actuator cylinder and the bellows flange vents the
interior of the bellows as its volume changes during the stroke. This venting
is normal and necessary 

while the valve is dynamic (opening or closing).

8.1.12 Air leaks from vent hole when open

If compressed air can be felt escaping from the vent slot in actuator cylinder
when the value is open, see section 8.3.9 on stem seal failure.

8.1.13 Limit switches not sending signals

Be sure that the valve is opening and/or closing completely, see sections
8.1.1 and 8.1.2. If the valve has traveled its full stroke, see section 8.3.17
about limit switch failure.

8.1.14 Solenoid valve buzzes or doesn’t work

If air is not passing through the solenoid pilot valve or is buzzing during
activation, see section 8.3.18 on solenoid valve failure.

Содержание HPS LPV1-25-AC Series





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды