MKS 907 Series, Инструкция по эксплуатации

Страница: 10 / 38

2 Safety
10
Series 907 Analog Convection Transducer
Instruction Manual - #109070001
These safety precautions must be observed during all phases of operation, installation, and service
of this product. Failure to comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and intended use of the instrument. MKS
disclaims all liability for the customer's failure to comply with these requirements.
• Read Instructions – Read all safety and operating instructions before operating the product.
• Retain Instructions – Retain the Safety and Operating Instructions for future reference.
• Heed Warnings – Adhere to all warnings on the product and in the operating instructions.
• Follow Instructions – Follow all operating and maintenance instructions.
• Accessories – Do not use accessories not recommended in this manual as they may be
hazardous.
2.2 Responsibility
It is the responsibility of the Customer to comply with all local, state, and federal ordinances,
regulations, and laws applicable to the installation, operation and service of this equipment.
It is the responsibility of the end user to provide sufficient lighting at work to meet local regulations.
Operation and Service of this equipment in strict accordance with the methods and procedures
supplied by MKS is the responsibility of the Customer.
MKS assumes no liability, whatsoever, for any personal injuries or damages resulting from the
operation or service of this equipment in any manner inconsistent or contrary to the methods
supplied in MKS literature including, but not limited to, manuals, instructions, bulletins,
communications, and recommendations.
For emergencies and for product safety related matters, contact the MKS Customer Service
Department. See Section 1.5 or Section 6.2 for detailed information regarding how to contact MKS
Customer Service Representatives.
Electrical Shock or Personal Injury
The service and repair information in this manual is for the use
of Qualified Service Personnel. To avoid possible electrical
shock or personal injury, do not perform any procedures in
this manual or perform any servicing on this product unless
you are qualified to do so.
Electrical Shock or Fire
To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
Objects and Liquid Entry - Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or
electric shock. Be careful not to spill liquid of any kind onto the
products.