Safety information:
Symbols used
:
Attention:
Calls attention to important procedures, practices or conditions.
General safety information
The safety instructions should always be followed during installation and operation of the 900 Series USB
Converter.
Pass safety information to all users.
Safety Precautions:
Electrical connections.
Pins are not protected against wrong electrical connections.
Wrong electrical connections can cause permanent damage to the USB Converter and/or
the connected transducer.
Internal fuse.
The USB Converter internal 24VDC power supply is equipped with a
thermal fuse. The fuse is self recoverable and should not be changed.
Connectability.
The 900 Series USB Converter was designed to operate one transducer
at a time. Please only connect one transducer to the 15 pin DSUB connector.
Current limitation.
Due to the limited current output of USB ports the 900 Series USB
Converter can deliver a maximum of 2
.
5W of power. This is satisfactory for most
transducers in the product line. However, hot cathode transducers like the 979B and 999
are not supported at present. The Description contains a list of compatible transducers.
Service and Repair.
Do not substitute parts or modify the USB Converter. Do not install
substituted parts or perform any unauthorized modification to the product. Return to a
MKS Calibration and Service Center for service and repair to ensure all of the safety
features are maintained.
CE marking.
This product complies with CE norms EN 61326 and generic
industry EN 61000-6-2. In order for the 900 Series USB Converter to comply
with the norms, it is necessary for the USB cable not to exceed 3m in length.
