Technical Documentation
Vertical Transfer Units
mk North America, Inc.
|
105-125 Highland Park Drive
|
Bloomfield, CT 06002
|
860.769.5500
|
www.mknorthamerica.com
©2017
|
Page 18
8
CONVEYOR MAINTENANCE - REPLACING THE BELT
All work to be performed by qualified personnel only.
Conveyor power must be disconnected before replacing the belt.
8.3 KHL 2012
Next Steps for Belt Removal and Replacement:
• The belt can now be replaced, once all auxiliary obstructions are removed (see General Remarks).
• Slide the existing belt off the free side of the conveyor frame.
• To replace belt, slip it over the side of the conveyor.
• Ensure belt return is in UHMW-PE bottom guide.
• Reassemble conveyor in the reverse order.
• Track and tension belt prior to use. (see Section 7).
2
1
3
General Instructions:
Loosen bolts (2) and screw (3) on both sides of the
assembly.
Push assembly (1) toward the conveyor frame to loosen the
belt.
Complete steps below.
